I/50 + DAC

TECHNICAL SPECIFICATIONS:

Power Output:
50 watts continuous from 20Hz to 20kHz. 1kHz total harmonic distortion typically 1% per channel, below 0.1% at 1 watt (Note that actual power output is dependent upon both line voltage and “condition” i.e.: if power line has high distortion, maximum power will be affected adversely, although from a listening standpoint this is not critical).
Power Bandwidth:
(-3dB points) 10Hz to 22kHz
Frequency Response:
(-3dB points at 1 watt) 7Hz to 30kHz
Input Sensitivity:
1.25V RMS for rated output
Input Impedance:
100K ohms Balanced, 48K ohms Single Ended
Output Polarity:
Non-inverting. Balanced input pin 2+ (IEC-268)
Input Impedance:
100K ohms Balanced, 50K ohms SE
8 Inputs – 4 balanced, 4 single-ended
Output Taps:
8 ohms, 4 ohms
Power Requirements:
105-130VAC 60Hz (210-250VAC 50Hz) 252 watts at rated output
Tube Required:
2 matched pairs 6550WE;
3 x 6922 (1 input, 2 driver)
Dimensions:
Width: 42 cm
Height: 18 cm
Depth: 34 cm
Weight: 18.1 kg.