Welcome to
6 Perspex SB |
product-template-default,single,single-product,postid-349960,theme-moose,eltd-cpt-2.2,woocommerce,woocommerce-page,woocommerce-no-js,ajax_fade,page_not_loaded,,moose-ver-3.3, vertical_menu_with_scroll,smooth_scroll,side_menu_slide_with_content,width_370,woocommerce_installed,blog_installed,columns-4,type1,wpb-js-composer js-comp-ver-6.4.2,vc_responsive

Ponuda proizvoda

6 Perspex SB

12.999,00 kn

• Acrylic Plinth

• Sub-chassis made from Corian with magnetic suspension

• Acoustically inert sandwich construction of platter with combination of MDF and vinyl layer as mat

• Inverted main bearing with ceramic ball/plate

• Belt drive with AC motor with DC driven AC generator

• Electronic speed control with 33/45 rpm switching

• Pre-mounted 9″ tonearm 9 cc Evolution

• Tonearm bearings with ABEC 7 ballraces

• 5P Connect it Phono CC cable with RCA plugs


• Dustcover included


6 Perspex SB: The ultimate sub-chassis turntable for the 21st century


The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic subchassis suspension system avoids parasitic noise normally caused by con-ventional spring mechanism. A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor unit drives the platter’s outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.

The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre platter and a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp. It runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/plate bearing. The headshell and armtube of high-end tonearm 9cc Evolution are fashioned from a single piece of carbon-fibre. A conical armtube avoids standing wave reflections. Inverted tonearm bearing comprises four hardened stainless tips in ABEC 7 spec ballraces. Supplied counterweights are suitable for cartridges weighing between 5 – 7,5g / 7 – 10g / 9 – 11g or 10 – 14g.

A top-grade connection cable `Pro-Ject Connect it E´ iwith RCA connectors is supplied (123cm). A dust cover is included.


Nominal speeds * 33/45 r.p.m.

Speed variance ±0,1%

Wow and flutter ±0,06%

Signal to noise 73dB

Effective tonearm mass 8g

Effective tonearm length 9 ” (230mm)

Overhang 18mm

Power consumption 6W max / <0,3W stanby

Outboard power supply 15V DC / 800 mA AC, 90-264V AC, 47 – 63Hz

Dimensions (W x H x D) 460 x 183 x 365mm, dust cover open 460 x 420 x 465mm

Weight 11kg

Reviews (0)

There are no reviews yet.

Be the first to review “6 Perspex SB”